 |
Canada's Leader...
|
|
|
Ever-Care Manufacturing
With over 15 years of experience in refining it's state of the art manufacturing processes, Ever-Care now boasts 3 plants in Canada. The company's plants are strategically located in Lethbridge AB, Morden MB and Renfrew ON, to provide optimal access to quality labour forces in quick, convenient shipping to all parts of the county.
Ever-Care Standards & Specifications (a quick summary)
Wood: thoroughly seasoned and kiln dried to a moisture content of 6 to 8% prior to manufacturing.
Face Veneers: No less than .025 before sanding; either rotary cut slices or flat slice for exposed panels; veneers hand matched for colour, grain and uniform appearance.
High Pressure Laminated Plastics: Plastic faced surfaces with 45 lb density particle board or equal core; backing sheet of .03 in with urea resin or equal for type 11 bondage.
Joints: All joints will be either splined, mortise and tenon, doweled, or full length blocked; glued and screwed in two directions following best practice construction.
Drawers: Drawer fronts minimum 3/4 thick, sides and backs minimum 1/2 inch thick melamine with all exposed surfaces taped in matching .05 PVC edging. Bottoms of 3/16 white marlite, contained in dadoes on all four sides and stapled to assure continuing squareness.
Glides: 5/8" diameter, non-marring, corrosion-proof plastic glides.
Scoring or "V" Grooving: 1/16 x 1/16 deep routed edges, sanded smooth.
Finishes: Highly skilled specialists apply Ever-care's catalyzed lacquer which resists water, alcohol, cosmetics, and even paint remover , unless left on for a prolonged period of time. Each step is carefully quality assured between sandings and applications.
It's this kind of quality and attention to detail that allows Ever-Care to provide one of the most respected warranties in the business. |
 |
 |
 |